Elandphone Electronic Co.,LtdNet weight: around 10g
Product material: ABS
Bluetooth version: V5.0
Communication distance: 10 meters
Suitable models: Switch, computer, TV
Is it plug and play: plug and play
Interface: type-c
Live or not: Built in non live
Product accessories: 1pcs/neutral English color box (host, Type-C to USB connector+manual)
The Type-C wireless screen projector enables high-speed, high-performance wireless
video signal communication between consumer electronics, computers and mobile
devices (the Type-c port supports Displqay Port protocol) through wireless 5G modules.
This product combines high bandwidth capacity and powerful error correction ability to
achieve high-definition video transmission. The wireless transmission distance in the
open area can be up to 150 meters, and support pass through the wall.
HDMI Resolution ...................…............…... up to 1920x1080p/60Hz
Support audio format ........….....…............................................. Stereo audio
Max bandwidth ..........................................….…148.5MHz
Max baud rate .......................…........….….......….… 1.485Gbps
Output cable distance ............ (1080p resolution) ≤8m AWG26 HDMI standard cable
Transmitter Max working current ........................….............… 450mA
Specifications:
TX
RX150m(open area)
HDMI cable
Receiver Max working current ....................................… 320mA
Operating Temperature range .....................….........…. (-15ºC to +55ºC)
Dimension (L x W x H) ...…....…................…..................... 75x39x12 (mm)
Weight ................................................................................................................... 19gx2
C
The matching code:
Wireless extender transmitter and receiver have been matched in the factory.
If the users need to match again, Please follow the steps:
1) Charging the transmitter and receiver.
2) After connecting the receiver to the display device, long press the code button at the
receiver for (5 seconds) to display 'Release the button to pair with Transmitter', and
release the code button at the receiver to enter the code mode 'Ready to pair'. At this
time, long press the code button of the transimitter to display 'Pairing', and release the
button of the transimitter to end the whole pairing process. After pairing, the connection
displayed on the screen changes from '' X to √ '', indicating that the connection is